Marine Hose Oil Pipeline Tensile Bending Fatigue Testing Machine

Marine Hose Tensile-Bending Fatigue Testing Machine Petroleum Pipeline Fatigue Test Bench

Large Pipeline Tensile-Torsional Fatigue Testing Machine Oil Pipeline Tensile Fatigue Torsional Fatigue

I. Product Introduction

The Marine Hose Tensile-Bending Fatigue Testing Machine is a specialized testing device designed to simulate the fatigue stresses experienced by marine floating hoses during actual use. It is compatible with marine hoses with inner diameters ranging from 25-300mm, including steel wire wound hoses, braided hoses, and rubber composite hoses, and adopts a frame-type structure.

By simulating the tensile loads and bending deformations that hoses endure in marine environments, it tests their fatigue life, structural integrity, and sealing performance. It can perform tests such as tensile-bending composite fatigue, bending fatigue under constant tension, and tensile fatigue under constant bending.

II. Main Technical Parameters:

Tensile Fatigue Parameters

1. Maximum Load: 800kN

2. Structural Form: Single-rod double-acting cylinder frame structure

3. Test Operation Height: 700mm

4. Drive Control Method: Microcomputer-controlled electro-hydraulic servo (stress-strain control)

5. Test Type: Minimum tensile 2 cycles/min

6. Fatigue Displacement Stroke: ±30mm

7. Overload Protection: 100% overload protection (no deformation, no mechanical damage)

8. Overall Noise: Not exceeding 70dB

9. Load Indication Accuracy: Better than ±1% of the indicated value

10. Force Measurement Range: 16kN~800kN, full range without grading

11. Load Control Accuracy: Better than ±1% of the indicated value

12. Stress Control Accuracy: Better than ±1% of the indicated value

13. Displacement Indication Accuracy: Better than ±1% of the indicated value

14. Displacement Resolution: 0.01mm

15. Piston Test Movement Speed Range: 0-150mm/min full load stepless speed regulation

16. Piston No-load Movement Speed Range: 0-200mm/min full load stepless speed regulation

17. Cylinder Piston Stroke: 1200mm

18. Tensile Space: 10.7m (excluding cylinder stroke)

19. Inner Tensile Space: 1200 mm

Torsional Fatigue Parameters

1. Maximum Output Torque: ±50000Nm; Measurement Range: 2%~100% F.S

2. Test Torque Indication Relative Error: Better than ±1%

3. Test Torque Repeatability Relative Indication Error: 1%

4. Maximum Effective Test Space: 10.7 meters

5. Torsion Angle Resolution: 0.1°;

6. Minimum Torsion 18°, 2 cycles/min

7. Voltage: AC380V, 50Hz Motor Power: Greater than 5kW

8. Host Dimensions: Approximately 14*2*1.5m (Length x Width x Height)

9. Approximate Net Weight: 37 tons